ISO-10303-21;
HEADER;
FILE_DESCRIPTION( ('AP242 STEP file','CAx-IF Rec.Pracs.---Geometric and Assembly Validation Properties---4.4--2015-08-17','CAx-IF Rec.Pracs.---Representation and Presentation of Product Manufacturing Information (PMI)---4.0.6---2019-08-19','CAx-IF Rec.Pracs.---User Defined Attributes---1.5---2016-08-15','CAx-IF Rec.Pracs.---3D Tessellated Geometry---1.0---2015-12-17','CAx-IF Rec.Pracs.---Model Styling and Organization---1.6---2018-08-17'), '2;1');
FILE_NAME( 'IDX_XAS-WM-U005.stp', '2021-11-25T15:13:56+01:00', (''), (''), 'ST-DEVELOPER v18.1', 'Elysium Co. Ltd. STEP Translator v8.3.0.0', '');
FILE_SCHEMA (('AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF { 1 0 10303 442 1 1 4 }'));
ENDSEC;
DATA;
#21943=PRODUCT_DEFINITION_SHAPE('','RA95625704_extract Shape',#21956);
#21944=( GEOMETRIC_REPRESENTATION_CONTEXT(3) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#21945)) GLOBAL_UNIT_ASSIGNED_CONTEXT((#21954,#21949,#21946)) REPRESENTATION_CONTEXT('3','3D') );
#21945=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(0.01),#21954,'point coincidence tolerance','maximum model space distance between geometric entities at asserted connectivities');
#21946=( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );
#21947=( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );
#21948=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(0.0174532925199433),#21947);
#21949=( CONVERSION_BASED_UNIT('DEGREE',#21948) NAMED_UNIT(#21953) PLANE_ANGLE_UNIT() );
#21950=( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );
#21951=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.),#21950);
#21952=DIMENSIONAL_EXPONENTS(1.,0.,0.,0.,0.,0.,0.);
#21953=DIMENSIONAL_EXPONENTS(0.,0.,0.,0.,0.,0.,0.);
#21954=( CONVERSION_BASED_UNIT('MILLIMETRE',#21951) LENGTH_UNIT() NAMED_UNIT(#21952) );
#21955=PRODUCT_DEFINITION_CONTEXT('part definition',#21964,'design');
#21956=PRODUCT_DEFINITION('design','',#21957,#21955);
#21957=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('','',#21962,.NOT_KNOWN.);
#21959=PRODUCT_CATEGORY('part','');
#21960=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#21962));
#21961=PRODUCT_CONTEXT('',#21964,'mechanical');
#21962=PRODUCT('RA95625704_extract','RA95625704_extract','',(#21961));
#21963=APPLICATION_PROTOCOL_DEFINITION('international standard','ap242_managed_model_based_3d_engineering_mim_lf',2011,#21964);
#21964=APPLICATION_CONTEXT('managed model based 3d engineering');
ENDSEC;
END-ISO-10303-21;